Capacity：12-1000t/h
Introduction：Flotation is a common beneficiation method used by gold concentrators to process rock gold ore. It is often used to process gold-bearing sulfide minerals with high floatability. The flotation process can enrich the gold in the sulfide minerals to a greater extent and the tailings can be directly discarded and the beneficiation cost is low. 80% of the rock gold mines in my country are selected by this process.
Applicable uses: Gold flotation process suitable for treating fine particles of gold can be high floating quartz veins sulfide ores containing gold and polymetallic sulfide ores and carbonaceous (graphite) ores.
Machine composition:
The process diagram of the beneficiation production line is as follows:
Mined ore start with an initial jaw crusher crushing via a hoist to the mining machine into uniform after crushing mill to a reasonable degree of fineness crushing the ore milling by a ball mill. The ore fines ground by the ball mill enter the next process: classification.
A and after graded mineral mixture when passing through the magnetic separator since different than the susceptibility of various minerals magnetic and mechanical forces via the magnetic substance mix separated.
B and fractionated mineral through the mixture passes through the separator through the mixing tube is selected from the mineral to be separated out because it contains large amounts of water subject to the preliminary thickener concentrate and then drying by the dryer i.e. Dry minerals can be obtained.
| Case Name | Gold Mine Production Line |
| Applicable uses: | Gold flotation process suitable for treating fine particles of gold can be high floating quartz veins sulfide ores containing gold and polymetallic sulfide ores and carbonaceous (graphite) ores. |
| Machine composition: |
60s
30min
24h
365d